Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement – screwdriving – turning – replacement – screwdriving – turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved.
- Especially suitable for tight spaces
- The special open end geometry expands the placement possibilities of the tool
- The low return angle in the open end "takes" the screw every 15°
- Slim ring side with 15° crank
- Suitable for docking with the Wera 2go system
caracteristicile produsului
For very tight spaces
The Joker 6003 ring spanner with its special open end geometry – open end offset by 7.5° and the double hexagon profile – doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn.
Joker 6003: For return angles of less than 30°
Double-hex geometry
The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping.
Joker 6003: Tilted ring side
The ring side is tilted at 15° to the tool axis to prevent injury.
Take it easy tool finder
Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets).
Suitable for docking with the Wera 2go system
The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back.
Aflați mai multe despre acest produs
Descrierea produsului
As installation spaces become increasingly confined, it remains necessary that tools enable users to work successfully. Narrow spaces require additional placement points of the tool, to allow screws to be accessed and actuated. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be "taken" every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With Take it easy tool finder: colour coding by size. The Joker pouches are suitable for attachment to walls, shelves, workshop trolleys and the Wera 2go system thanks to the hook and loop fastener system on the back.
Unelte din acest set
15.5 x 105 mm
05020190001
16 x 105 mm
05020198001
17 x 110 mm
05020199001
18 x 115 mm
05020200001
19 x 120 mm
05020219001
110 x 125 mm
05020201001
111 x 135 mm
05020202001
112 x 148 mm
05020203001
113 x 160 mm
05020204001
114 x 167 mm
05020205001
115 x 174 mm
05020206001
116 x 182 mm
05020207001
117 x 190 mm
05020208001
118 x 210 mm
05020209001
119 x 230 mm
05020210001
Hook and Loop Fastener Strip 240
150 x 240 mm
