A captive, freely swivelling bit magazine for 12 bits (1/4", 25 mm length) is integrated in the handle of the compact Zyklop ratchet.
- Compact Zyklop ratchet with integrated bit magazine
- The magnetic direct mounting simultaneously turns the 3/8" ratchet into a bit ratchet screwdriver with 1/4" bit mounting
- Freely pivoting ratchet head with 5 predefined locking positions
- Fine tooth reversible ratchet (72 teeth) for a low return angle of only 5°
- Captive and freely swivelling bit magazine for easy removal and secure storage of the bits
- Universal holder with stainless steel sleeve and strong permanent magnet, can be used as extension
- Robust textile holster to be attached to the belt and docked onto the Wera 2go system
מאפייני המוצר
Combination tool mounting
The magnetic direct mounting is suitable for 3/8" sockets as well as ¼" bits without the need for an adapter.
With integrated bit magazine
Swivelling bit magazine
The swivelling bit magazine allows for the bits to be removed easily in almost any situation and cannot be lost. The bits are safely stored.
Freely pivoting ratchet head
The ratchet head pivots freely and can be locked into any defined position by using the slide switch that is positioned on either side. It is even possible to work in very confined and difficult-to-access areas with enhanced hand clearance. The predefined locking at 0°, 15° and 90°, both to the right and left, ensure safe working without any slipping of the ratchet head.
Locking the ratchet head
Thanks to the sliding switch on both sides, the ratchet head can be locked at the pre-defined positions 0° as well as 15° and 90° to the right and left.
Small return angle
The fine toothing with 72 teeth allows for a low return angle of only 5° for working in constricted screwdriving situations.
Simple direction change
The Zyklop Pocket ratchet can be quickly and easily reversed for clockwise/anti-clockwise rotation in any position using the knurl.
למידע נוסף על מוצר זה
תיאור המוצר
Compact Zyklop ratchet with bit magazine for the pocket. Magnetic direct mounting for ¼" hex drive bits and 3/8" sockets. Rapid tool change thanks to the non-locking mounting. As the head is lockable at 0°, 15° and 90°, the tool can be used as a ratchet and as a ratchet screwdriver. The fine toothing with 72 teeth allows for a low return angle of 5°. Wide range of applications thanks to 12 bits integrated in the handle. The robust ratchet mechanism allows for ample torque. Perfect combination of a Zyklop ratchet with a 12-piece screwdriver set. The 75 mm long universal holder for 1/4" hex drive bits can be used as an extension. Including sockets in the commonest dimensions. One robust textile holster 9468 to be attached to the belt and docked onto the Wera 2go system.
וידאו
כלים בערכה זו
8009 Zyklop Pocket
13/8" x 1/4" x 133 mm
1
הצג עוד
893/1/1 Universal Bit Holder
1PH 1 x 25 mm
05056420001
1PH 2 x 25 mm
05056422001
2
הצג עוד
1TX 10 x 25 mm
05066120001
1TX 15 x 25 mm
05066122001
1TX 20 x 25 mm
05066124001
1TX 25 x 25 mm
05066126001
4
הצג עוד
11/8" x 25 mm
05135073001
15/32" x 25 mm
05135074001
13/16" x 25 mm
05135075001
11/4" x 25 mm
05135076001
4
הצג עוד
1# 1 x 25 mm
05066405001
1# 2 x 25 mm
05066410001
2
הצג עוד
15/16" x 29 mm
05003570001
13/8" x 29 mm
05003572001
11/2" x 29 mm
05003574001
3
הצג עוד
1155 x 65 mm
05136408001
1
הצג עוד
Hook and Loop Fastener Strip 70
150 x 70 mm
1
הצג עוד
